Features
Setting Procedure
Installation Data
Performance Data
Features
– Medium duty anchor
– Pre -assemble design
– Shallow embedment depth can avoid contact with
reinforcement
– Guaranteed expansion achieved by use of setting
tool
– Flush fitting, no protrusions when not in use
Materials:
– Carbon steel, zinc plated
– Grade 304 stainless steel
– Grade 316 stainless steel
Setting Procedure

1) Drill hole to correct diameter and depth

2) Use the blow-out pump to clean the hole

3) Tap the anchor into the drill hole

4) Using the setting tool to set the expander cone

5) Position fixture, insert bolt and tighten to require torque
Installation Data
Anchor Size (mm) | Anchor Length (mm) | Drill Hole Diameter (mm) | Drill Hole Depth (mm) | Internal Threaded Length (mm) | |
---|---|---|---|---|---|
M6 | 1/4″ | 25 | 8 | 25 | 10 |
M8 | 5/16″ | 30 | 10 | 30 | 12 |
M10 | 3/8″ | 30 | 12 | 30 | 12 |
40 | 12 | 40 | 15 | ||
M12 | 1/2″ | 50 | 16 | 50 | 20 |
M16 | 5/8″ | 65 | 20 | 65 | 25 |
M20 | 3/4″ | 80 | 25 | 80 | 40 |
Performance Data
Concrete – ≥ 25 N/mm2
Anchor Size (mm) | Min. Concrete Thickness (mm) | Min. Edge Distance (mm) | Min. Anchor Spacing (mm) | Recommended Load | |
---|---|---|---|---|---|
Tensile(kN) | Shear (kN) | ||||
M6 ( 1/4″ ) x 25mm | 100 | 50 | 50 | 2.5 | 2.1 |
M8 ( 5/16″ ) x 30mm | 100 | 60 | 60 | 3.5 | 3.2 |
M10 ( 3/8″ ) x 30mm | 100 | 80 | 80 | 4.0 | 4.0 |
M10 ( 3/8″ ) x 40mm | 100 | 80 | 80 | 5.2 | 5.0 |
M12 ( 1/2″ ) x 50mm | 125 | 100 | 100 | 8.0 | 8.1 |
M16 ( 5/8″ ) x 65mm | 140 | 130 | 130 | 12.5 | 16.0 |
M20 ( 3/4″ ) x 80mm | 150 | 160 | 160 | 18.0 | 22.0 |