– Excellent Adhesion on most materials
– Good filling capabilities
– Reusable
– Very accurate dosage
– High thermal and acoustical insulation
– Resistant to moisture
Dampen the working surface
Use between working temperature
Shake the can several times before use
Remove plastic cap and screw the can onto the dispensing gun
After curing remove excess foam mechanically
– Working temperature : + 5 °c to 35 °c
– Cure foam is non-toxic
– Sticks to all solid materials except
polypropylene, polyethylene, teflon
and silicone rubber.
Yield expansion 20 to 45 litres
Base Polyurethane
Tack-free time 5 to 12 minutes
Tensile strength 10 N/cm2
Compressive strength min 3.5N/cm2
Thermal conductivity 0.03 W / mK
Shelf – life 12 months
